Cradlepoint CBA750 Series Průvodce nastavením stáhnout pdf (Strana 10)

LED Information

SIGNAL STRENGTH BUTTON Blue LED bars indicate the active modem’s signal strength. If signal strength is

not shown press button. 4 Solid Bars = strongest signal 1 Blinking Bar = weakest signal

POWER The CBA750 must be powered using an approved power source. Green = Powered On. No Light =

Not receiving power. Check that the unit is connected to an outlet or Ethernet connection with PoE.

NETWORK LAN CONNECTION Green = Connected to an active Ethernet interface, blinking lights indicate

traffic. No Light = Not connected to Ethernet, the connection is not configured correctly, or switch or router are

not configured correctly or turned on.

MODEM CONNECTION Green = Data connection has been established with your wireless broadband

network, blinking indicates connection attempt. Amber = Modem is not active and may be engaged in the

failover process, blinking indicates connection error. Red = Modem communication error. No Light = Wireless

broadband network is unavailable or connection is still in progress.

MODEM ACTIVATION If using a supported, unactivated modem, press to manually activate an attached 3G

modem (if necessary). While activating, “Failover” and “High Speed” LEDs will blink green. When completed, un-

plug the modem and re-insert into the CBA750 to re-establish a connection. If there is an error during activation

the “Attention” LED will blink red.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Žádné komentáře

Cradlepoint CBA750 Series Průvodce nastavením Strana 10